Profesionalni tiskalnik MGI JETvarnish 3DS
Profesionalni tiskalnik MGI JETvarnish 3DS

MGI JETVARNISH 3DS

  • IZJEMNA PRODUKTIVNOST - JETVARNISH 3DS je naprava za UV-lakiranje, ki omogoča tiskanje z enim prehodom in nudi hitro in zmogljivo produktivnost.
  • DIGITALNA PREDNOST Digitalizacija UV-lakiranja vam omogoča, da vzamete nekaj listov iz vsakega opravila in jih obdelate z UV-lakom, da jih bodo vaše stranke lahko VIDELE in OBČUTILE učinek, ki bi jih njihova opravila lahko imela. Z napravo JETVARNISH 3DS lahko vaša stranka neposredno UV-lakira digitalne 3D-natise. Izkoristite posebej zasnovano formulo za lakiranje v kombinaciji z zmožnostjo natančnega razlikovanja debeline premaza na vsakem listu in dodajte individualen in poseben pridih svojim digitalnim odtisom. Debelino laka je mogoče natančno prilagoditi potrebam stranke na njeno zahtevo. MGI JETVARNISH 3DS je popolna rešitev za donosno tiskanje z manjšo in srednje veliko naklado.
  • TEHNOLOGIJA UV-BRIZGANJA Pametna kombinacija ekskluzivne tehnologije brizgalnega tiskanja naprave MGI s piezoelektričnimi tiskalnimi glavami s kapljanjem na zahtevo družbe KONICA MINOLTA vam prinaša kakovost, ki si jo zaslužite, od prve do zadnje strani. 
  • PRILOŽENA ZBIRKA PROGRAMOV - JETVARNISH 3DS HubManager vam omogoča, da spremljate svoja opravila, upravljate čakalno vrsto opravil, ustvarjate vstopnice za opravila, prikličete ponatise in prilagajte svoj optični bralnik AIS z enim samim preprostim in intuitivnim orodjem. Zmogljiva funkcija vam omogoča enostaven izvoz vseh svojih podrobnih proizvodnih podatkov za notranje stroške v namen analize in poročila. Spot Varnish Editor vam omogoča sprotno urejanje datotek z opravili. Stranka s tem dobi potrebno prilagodljivost, da lahko sproti nastavi in spremeni svoja tiskalna opravila in prihrani čas ter denar. Product Cost Analyzer lahko oceni proizvodne stroške na desetino centa natančno in stranki ponudi natančne informacije o stroških potrošnega materiala na tiskalno opravilo, preden je opravilo sploh natisnjeno.
  • AIS SmartScanner – naprava JETVARNISH 3DS je opremljena z optičnim bralnikom AIS SmartScanner za avtomatizirano registracijo listov.
  • LAK NA OFSETNIH IN DIGITALNIH ODTISIH – z napravo JETVARNISH 3DS lahko vaša stranka lakira na odtise s tonerjem ali ofsetne odtise z ali brez plastifikacije. S tem je njen potek dela precej bolj prilagodljiv in enostavnejši.
Profesionalni tiskalnik MGI JETvarnish 3DS
Profesionalni tiskalnik MGI JETvarnish 3DS

Lastnosti

Lastnosti

MGI JETVARNISH 3DS

Ne zadovoljite se zgolj s čudovito natisnjenimi opravili - čas je, da svojim strankam ponudite večjo vrednost in več ustvarjalnosti. JETVARNISH 3DS spremeni vaša natisnjena opravila v čudovite natise, ki se jim vaše stranke ne bodo mogle upreti. Svoje digitalne natise lahko na enostaven način lakirate, označite določena območja ali dodate 3D-učinke, zaradi katerih bodo še živahnejši in otipljivejši. Digitalizacija UV-lakiranja vam omogoča, da vzamete nekaj listov iz vsakega opravila in jih obdelate z UV-lakom ter tako izdelate otipljive dokaze, ki jih bodo vaše stranke lahko videle, prijele ter občutile učinek, ki bi jih njihova opravila lahko imela. S popolnoma digitalno rešitvijo JETVARNISH 3DS lahko pripravite vse to na zahtevo in prihranite čas ter denar.

Profesionalni tiskalnik MGI JETvarnish 3DS

Specifikacije in prenosi

Specifikacije in prenosi
System Configurations - JETVARNISH 3DS
Printing Technology MGI’s exclusive inkjet engine technology
Drop-on-Demand (DoD) technology
Piezoelectric printheads,developed and manufactured by Konica Minolta
Single pass printing
Flexible & scalable printing architecture
Coating Thicknesses Depending on your file, the inks used and the type of
surface of your sheet, the coating thickness can vary.
On laminated and aqueous coating: 21 μm – 232 μm*  
for 3D raised effects and tactile finish. On toner and  
coated paper: 30 μm – 116 μm/232* μm for 
3D raised effects and a tactile finish
Production speed In 2D/flat mode:
Up to 2,077 A3 sheets per hour (with 21 μm)
In 3D/raised mode:
Up to 1,468 A3 sheets per hour (with 43 μm)
Up to 547 A3 sheets per hour (with 116 micron)
Registration SmartScanner coupled with Artificial Intelligence (AIS)  
for fully real-time  automated sheet-to-sheet 
registration process. No crop mark required.
Formats Min. 21 x 29.7 cm / 8 x 11.8”
Max. 36.4 x 102 cm / 14.33 x 40.15”
Max. Printable Width 35.3 cm
Substrate Thickness Min: 135 gsm and not less than 150 μm or 6 mil before printing & lamination
Max: 450 gsm and not more than 450 μm or 18 mil before printing & lamination
Motorized height-adjustment print heads
Substrates** Printing on most matte or glossy laminated surfaces,
with or without aqueous coating, layered paper, plastic, 
PVC and other coated materials
Varnish on toner Spot 3DS coat directly onto most digital prints with 
no lamination or coating required
UV Coatings and capacity 3D varnish delivered with a 10-litre tank capacity
High Capacity 
Automatic Feeder
Feeder able to handle a paper pile up to 30 cm
2,500 sheets at 135 gsm
High Pile Output Stacker Stacker able to handle a paper pile up to 30 cm
2,500 sheets at 135 gsm
Paper Path 100% flat paper path; Vacuum feed system
Air feed system; Automatic double sheet detection
In-line LED dryer “On-the-fly” drying & curing via integrated LED
Spot Coated sheets can be immediately finished     
or handled, no additional drying time required
Front End System Dedicated PC; CPU + touch-screen + keyboard/mouse
Ethernet connection 10/100/1000 BT (RJ 45)
Built-in Application Software Suite
Comprehensive job queue management
Predictive printing cost calculator 
(coating consumption)
Dedicated image editor to do local and fast 
image editing prior to production
Maintenance & 
Remote Technical Support
Daily maintenance completed in less than 10 minutes
Majority of procedures are automated
Automatic cleaning system
From cold start to production in less than 10 minutes
Remote troubleshooting & support via included video/  
web camera (high speed internet connection required)
Operator Panel Integrated user-friendly LCD touch-screen
Options

Twin bar option:
2nd print engine to increase 3D print speed and coating  
thickness, up to 232 μm variable data option. 
Variable data option:
Complete system including RIP, barcode reader and  
MGI software to automatize the association between 
a pre-printed barcode and its specific spot coating file

Dimensions 
(L x W x H) & 
Weight

4.26 (5.47*) x 1.14 x 1.80 meter   
(with the longest paper extensions installed)
1 metre clearance required on all 4 sides

± 1,100 kg

Electrical requirements 7.5 kW (32 A) at 220–240 Volts; 2 plug CEE/IP44 32A (1P+N+E)
Operating Temperature: 18 to 30°C
Environment Relative humidity: between 35 – 55%  
(no condensation)
Respecting the 
Environment
Eliminates resource waste (wasted electricity,paper and varnish)
No plates (offset) or screens (screen printing)
No cleanup or preparation between jobs
Drastic reduction in amount of consumables and    
use of bulk packaging.
Coating without volatile solvent.


The default sheet format is A3, unless otherwise stated
1) with an additional option installed
2) speed will vary according to printing parameter used
3) confirm substrate/toner compability with KM

* With the Twin Bar
** The used substrate needs to be either coated or laminated. Otherwise the media is absorbing the varnish and the destred effect might get lost
 

System Configurations - iFOIL S
Production Speed Up to 2,298 A3 sheet size per hour 
(or 20 meters/min)
Formats Min: 21 x 29.7 cm 
Max: 36.4 x 102 cm
Hot foil stamping area 32 x 102 cm
Substrate thickness Min: 135 gsm and not less than 150 μm/6 mil 
before printing and lamination
Max: 450 gsm and not more than 450 μm/18 mil    
before printing and lamination
Motorised height-adjustment print heads
Substrates Most matte or glossy laminated surfaces, with or    
without aqueous coating, layered paper, plastic, 
PVC and other coated materials
Most digital prints without any lamination or coating
Foil rolls Standard internal core: 1 inch - Min./Max. widths:      
10/36 cm
400 meter length (average)
Up to 2 rolls loaded simultaneously on the same holder 
3” internal core is optional
Embossing From 21 μm to 116 μm thickness 
From 21 μm to 232 μm thickness (Twin Bar optional)
Compatibility Online module that connects to all JETVARNISH 3DS
Dimensions (L x W x H) 
Weight

2.09 x 1.24 x 1.80 meter 
± 850 kg

Electrical requirements 7.5 kW (32 A) at 220–240 V – 50/60 Hz
2 plugs CEE/IP44 32A (1P+N+E)
Options High capacity stacker for paper stacking up to 
60 cm paper height
3” core inch foil holder

Sorodna strojna oprema

Sorodna strojna oprema

Kontaktirajte nas

Kontaktirajte nas

Da, želim prejemati informacije po:*

o trenutnih izdelkih in storitvah podjetja Konica Minolta Slovenija in drugih povezanih družb znotraj skupine, ki so prilagojena mojim osebnim interesom . Vaši podatki bodo obdelani v skladu z našim pravilnikom o zasebnosti .

Polja z * so obvezna!